CITROEN DS3 - Fitting a Wheel

209
Practical information
Fitting a wheel
After changing a wheel
Tostorethepuncturedwheelinthe
bootcorrectly,firstremovethecentral
cover.
Whenusingthe"space-saver"type
temporary-usesparewheel,donot
exceed50mph(80km/h).
Havethetighteningoftheboltsandthe
pressureofthesparewheelchecked
byaCITROËNdealeroraqualified
workshopwithoutdelay.
Havethepuncturedwheelrepairedand
replace it on the vehicle as soon as
possible.
Donotdrivewithmorethanone
temporary-usesparewheelfittedtothe
vehicleatonetime.
List of operations
F Putthewheelinplaceonthehub.
F Screwintheboltsbyhand.
F Pre-tightenthesecuritybolt(ifyourvehicle
isfittedwiththem)usingthewheelbrace1
fittedwiththesocket4.
F Pre-tightentheotherboltsusingthe
wheelbrace 1only.