213
Practical information
Dipped beam headlamps
(halogen model)
Main beam headlamps
(halogen model)
Press on the top of the connector then
pivot the assembly downwards.
Remove the connector with the bulb.
Remove the bulb and change it.
For reassembly, carry out these operations in
reverse order, but engaging the bottom of the
bulb first.
Remove the protective plastic cover by
pulling on the tab.
Remove the protective plastic cover by
pulling on the tab.
Remove the connector with the bulb by
pressing on the lug at the bottom.
Remove the bulb and change it.
For reassembly, carry out these operations in
reverse order.