Clock
The analogue clock does not have an
adjustment button.
To set the time, refer to the section relating to
the screen (audio system) configuration menu.
The clock is synchronised with the screen time;
once the the setting has been confirmed in
the screen, the hands will turn to synchronise
with the screen, and each time the ignition is
switched on.
Setting the date and time
Audio system / Bluetooth
Press MENU .
Using the arrows, select " Personalisation-
configuration " and confirm.
Using the arrows, select " Display
configuration " and confirm.
Using the arrows, select " Date and time
adjustment " and confirm.
Select the setting to be modified. Confirm
by pressing OK , then make the change and
confirm again to save the modification.
Adjust the settings one by one, confirming by
pressing the OK button. Next select the " OK "
tab on the screen then confirm to exit from the
" Date and time adjustment " menu.
To Next Page
Loading...
