49
Monitoring
eMyWay
Select " Synchronize the minutes
with GPS " so that setting the minutes
is done automatically by satellite
reception.
The clock, located in the dashboard,
is synchronised with the time in the
screen. It is set once the time is
adjusted using the " SETUP " menu and
every time the ignition is switched on.
Press SETUP to display the " Configuration "
menu.
Select " Display configuration " and confirm.
Select " Set date and time " and confirm.
Select the setting to adjust.
Confirm by pressing OK , then adjust the setting
and confirm again to save the modification.
Adjust the settings one by one.
Then select " OK " on the screen and confirm to
save the settings.
To Next Page
Loading...
