370
AXLES
SUSPENSION
STEERING
POWER-ASSISTED STEERING SPECIFICATIONS
Tightening torques (m.daN).
Unions between pump unions and power steering valve 2 ± 0.3
(16) Fixing screw 2.2 ± 0.3
(17) Fixing screw 2.2 ± 0.3
(18) Fixing screw 2.2 ± 0.3
NOTE : Coat the threads with product ‘‘E3’’.
A pressure switch is implanted in the hydraulic piping between the high
pressure pump and the power steering valve.
- Opening pressure = 30 / 35 Bars.
- Closing pressure = 25 Bars minimum.
Tightening torque = 2 ± 0.2
Capacity of power steering circuit = 1 Litre.
Oil quality = TOTAL FLUIDE ATX.
Power steering pump : Supplier SAGINAW.
Pump adjustment = 100 ± 5 Bars.
Pump shaft threading 3/8 - 16 threads per inch
B3EP118D
XSARA PICASSO - All Types