166
INJECTION
FITTING BOSCH INJECTORS
Engine : VJX
B1HP0YNC B1HP0YPC B1HP0YGC
Fitting an injector
The copper seal (1) and the
fire seal washer (2) are to be
replaced each time they are
removed.
NOTE : Fitting parts of diffe-
rent makes is PROHIBITED.
WARNING : Ensure that the fire
seal washer (2) is fitted the right
way round.
Tighten the injector holder
on the cylinder head to :
[1] Tool to remove/refit injectors (2) 7007-T
[2] 7008-T Tool kit 4123-T
(3) Tighten lightly to avoid distortion.
Tighten to 7 m.daN.
VJZ
7 m.daN
All Types
9 m.daN
SAXO - XSARA
To Next Page
Loading...
Need help?
General
