CKD FLUEREX PF Series - Functions and operations for monitor; Measurement mode; Write mode operations

PF-F/PFU Series
Functions and operations for monitor
Measurement mode
Note) Integrating ow is displayed in integers.
In 10 seconds, the light goes from blinking to
steady and the display automatically returns to
the instantaneous ow rate display.
Holding down for 2 seconds conrms the setting: the blinking light will
change to a steady light and the display will constantly show an
integrated value. As the measurement setting is retained even if the
power is turned OFF, resetting is not necessary.
To return to the instantaneous ow rate display, hold down for 2 seconds again.
Temporary integrating ow display
Instantaneous ow rate display
●
Measures the instantaneous ow rate/integrating ow. (when powered on)
Hold down for 2 seconds
Write mode
To measurement mode
· Hold down the Shift/Up keys together for 10
seconds to clear the integrating value.
· Set the h (hysteresis) value with the Shift/Up keys.
· Set the H (High) value with the Shift/Up keys.
· Set the L (LOW) value with the Shift/Up keys.
· Set the parameter with the Up key.
Note) L, H and h are not displayed if parameter 2 is
selected. Refer to the instruction manual for
details.
Note) In the example below, P (parameter) is set to 0,
L (Low) to 100, H (High) to 200, and h
(hysteresis) to 10 L/min (normal).
●
Set the switch output.
Clearing integrating value
Hysteresis setting
H (High) setting
L (Low) setting
Parameter setting
L
TOTAL
H
OUT2
OUT1
L/min (nor)
L/min (nor)
L/min (nor)
L/min (nor)
L/min (nor)
L
TOTAL
H
OUT2
OUT1
L
TOTAL
H
OUT2
OUT1
L
TOTAL
H
OUT2
OUT1
L
TOTAL
H
OUT2
OUT1
L
PF SERIESAIR FLOW SENSOR
TOTAL
H
OUT
L/min (nor)
FLUEREX
CKD
Flashing
L
PF SERIESAIR FLOW SENSOR
TOTAL
H
L/min (nor)
FLUEREX
CKD
OUT
F.R.L
F (Filtr)
R (Reg)
L (Lub)
PresSW
Shutoff
SlowStart
FlmResistFR
Oil-ProhR
MedPresFR
No Cu/
PTFE FRL
Outdrs FR
F.R.L
(Related)
CompFRL
LgFRL
PrecsR
VacF/R
Clean FR
ElecPneuR
AirBoost
SpdContr
Silncr
CheckV/
other
Jnt/tube
AirUnt
PrecsCompn
Mech/
ElecPresSw
ContactSW
AirSens
PresSW
Cool
AirFloSens/
Contr
WaterRtSens
TotAirSys
(Total Air)
TotAirSys
(Gamma)
RefrDry
DesicDry
HiPolymDry
MainFiltr
Dischrg
etc
Ending
1387
Discontinue