To Next PageTo Next Page
Need help?Do you have a question about the CKD RAPIFLOW FSM2 N Series and is the answer not in the manual?
General| Manufacturer | CKD |
|---|---|
| Product Line | RAPIFLOW |
| Seal Material | FKM |
| Contact Configuration | SPDT |
| Protection Rating | IP65 |
| Type | Flow Switch |
| Connection Size | 1/4 inch |
| Body Material | Brass |
| Operating Pressure Range | 0 to 1.0 MPa |
| Operating Temperature Range | 0 to 50°C |
| Contact Rating | 30 VDC |
Categorizes safety advice into Danger, Warning, and Caution levels.
Specifies safe fluids and environmental conditions for operation.
Outlines recommended practices for device operation and upkeep.
Details the purpose of main, unit, and sub-displays, plus switch output indicators.
Explains the function of Up, Down, Mode keys, Knob, and Lock Nut.
Covers correct piping, torque application, and mounting methods.
Illustrates NPN and PNP output circuit examples for connection.
Describes instantaneous/integrated flow, peak hold, verification, and error display.
Covers switch output patterns, forcible output, and zero point adjustment.
Explains configuration for flow direction, CH2 function, response time, and display.
Details on displaying flow, integration, peak hold, verification, and key lock.
Steps to access and use the standard setting menu.
Setting switch output patterns, modes, data, and forcible output.
Details on Window, Hysteresis, Integrated Output, and Pulse patterns.
Instructions for calibrating the sensor's zero point.
Procedures for entering and navigating advanced configuration options.
Covers flow direction, CH2 function, response time, display speed, and color.
Settings for flow units, energy saving mode, and resetting configurations.
Configuring CH2 for auto reference via key or external input.
Adjusting response time, display speed, sub-display, and colors.
Setting up 1-point/2-point inputs and operation modes for auto reference.
Setting hysteresis values and displaying model-specific information.
Configuring flow units, eco mode, and resetting device parameters.
Explains error codes (E01-E04, Lo, Hi) and their corrective actions.
Provides solutions for common issues like no flow or unstable output.
Covers flow rate, port size, working fluid, pressure, and temperature limits.
Details linearity, pressure/temperature characteristics, and output types.
Information on power supply, functions, installation attitude, and protective circuits.
Covers flow rate, port size, working fluid, pressure, and temperature for stainless models.
Details linearity, pressure/temperature characteristics, and output types for stainless models.
Information on power supply, functions, installation, and protection for stainless models.
Dimensional drawings for integrated indicator types with various port sizes.
Dimensional drawings for needle valve types with different port sizes.
Information on optional brackets, panel mount kits, and panel hold figures.
Explains the model code, including output, analog type, and flow rate range.
Details choices for port size, working fluid, cable, bracket, and clean specifications.
Lists available discrete option models such as brackets and panel mount kits.
