2.2.2 RHB MEDION 340 - 310 - 299 216.0
Cab heater
Unscrew gas struts (D) from the cab top on the left and
right side at (E).
Lift the cab roof and fasten gas struts (D) with a mount-
ing angle (M, self-manufactured) on the left and right
side further towards the front at an existing hex. bolt.
When folding the cab roof up, carefully pull the
lateral antenna cables along.
(Fig. 5, 6)
Slacken off hose clamps (G) of heater hoses (H and P)
from radiator (K) and remove heater hoses. Collect
any leaking cooling water.
Dispose of cooling water in a way that is harmless
to the environment and in accordance with existing
anti-pollution regulations.
(Fig. 7, 8)