Need help?Do you have a question about the Claas AVERO and is the answer not in the manual?
General| Type | Combine Harvester |
|---|---|
| Manufacturer | Claas |
| Engine Type | Diesel |
| Tank Capacity | 10, 000 liters |
| Working Width | 4.3 - 6.2 m |
| Transmission | Continuously variable transmission (CVT) |
Discusses the importance of routine maintenance for minimizing downtime and maximizing output.
Lists and defines abbreviations used throughout the guide for clarity and consistency.
Explains how cutting height is displayed and adjusted using sensor bars and skids.
Details the display and adjustment of ground pressure using sensor bars and weight distribution.
Describes the procedure to save the current cutting height or ground pressure settings.
Outlines the steps to save a specific pre-set cutting height for future use.
Instructions for adjusting concave distance to optimize threshing performance.
Guide on how to adjust the drum speed using the console switches for optimal threshing.
Steps to adjust the fan speed via the console for efficient cleaning.
Information on the function and types of dividers on the cutterbar.
Guidance on fitting, checking, and types of lifters for the cutterbar.
Explains the use of de-awning plates to improve threshing in difficult conditions.
Importance of regular emptying of the stone trap to prevent foreign object damage.
Details on adjusting the straw curtain to control material throw onto straw walkers.
Description of the agitator tines on straw walkers for grain separation.
Explains the role of the preparation pan in separating grain from chaff and its cleaning.
Guide to adjusting fan speed for optimal grain cleaning.
Method for calculating grain loss per square meter using a loss tray.
Table providing average thousand grain weights for different crops used in loss calculations.
Lists part numbers for various cutterbar components and kits.
Lists part numbers for chopper components.
Lists part numbers for various replacement kits.
To Next Page