Need help?Do you have a question about the Claas TUCANO 400-300 and is the answer not in the manual?
General| Brand | Claas |
|---|---|
| Model | TUCANO 400-300 |
| Category | Farm Equipment |
| Language | English |
Rotary switches for navigating menus and selecting values.
Buttons and switches for machine operation and attachment engagement.
Buttons for system information and quick access functions.
Switches for hazard warning, road travel safety, and maize picker folding.
Controls for lighting panel and air conditioning.
Various dashboard indicator lights for machine status and warnings.
Controls for reel position and movement.
Controls for AUTOPILOT, front attachment, and height adjustments.
Controls for unloading tube operation and cross levelling.
Identifies key indicators and readouts on the CEBIS display.
Details specific performance monitoring parameters shown on CEBIS.
Explains how to adjust settings using the CEBIS rotary switch.
Details how to use the HOTKEY for adjustments and settings.
Explains the meaning of various icons on the CEBIS display.
Explains the meaning of various icons used with the HOTKEY system.
Emphasizes following correct procedures and consulting the operator's manual.
Instructions for adjusting belt tension for different guide types.
Specific steps for adjusting the pump drive belt tension.
Explains daily zeroing for 'Zero returns' and 'Zero yield'.
Details seasonal calibration for AUTOCONTOUR and cutterbar working position.
Information on cutterbar dividers and the fitting of lifters.
Guidance on knife maintenance and table auger function.
Instructions for setting auger height and cutterbar skids.
Details on fitting the side knife and connecting hydraulic pipes.
Explains de-awning plates and stone trap maintenance.
Guidance on initial threshing settings and operational tips.
Focuses on the preparation pan and deflector curtain for separation.
Details on adjusting fan speed, wind board, and throttle for cleaning.
Guidance on determining where losses occur (front vs. rear of combine).
Methods for checking and monitoring losses using CEBIS and apps.
Troubleshooting guide for straw quality and return material issues.
Instructions on activating and setting up the LASER PILOT system.
Advice for harvesting in wet and laid crop conditions.
Specific advice for unloading wet grain and chopping wet straw.
Steps for seasonal calibration of AUTOCONTOUR, VARIO, and max no-load speed.
To Next Page