Need help?Do you have a question about the Claas TUCANO 2017 and is the answer not in the manual?
General| Brand | Claas |
|---|---|
| Model | TUCANO 2017 |
| Category | Farm Equipment |
| Language | English |
Importance of routine maintenance to minimize downtime and maximize output.
Lists abbreviations used in the guide, like LHS, RHS, and APS.
Emphasizes reading the operator's manual and assessing risks for safe operation and maintenance.
Identifies key components of the hybrid combine harvester with numbered labels.
Identifies key components of the walker combine harvester with numbered labels.
Details the CEBIS information screen, storage, armrest, and controls on the right-hand console.
Explains switches and panels located on the right hand and roof consoles for various functions.
Lists and explains the various indicator lights and symbols found on the steering column display.
Details the functions of the C-MOTION multifunction lever for reel, attachment, and unloading control.
Explains the various indicators and data displayed on the CEBIS screen during road travel.
Details the data and indicators shown on the CEBIS screen during harvest operations.
Explains how to use the CEBIS rotary switch and value adjustment switch to change settings.
Describes the HOTKEY function for adjusting frequently changing settings and navigating its interface.
Lists and explains various symbols used within the CEBIS system for different adjustments.
Lists and explains symbols associated with the HOTKEY function for specific adjustments.
Guides on how to navigate through CEBIS menus, select options, and adjust values.
Explains the procedures for daily zeroing and seasonal calibration of machine parameters in CEBIS.
Details the importance of learning the cutterbar working position in CEBIS for accurate yield measurements.
Describes the function of the cutterbar and its components like dividers and lifters.
Covers checks and adjustments for the knife, keeps, and the table auger timing.
Explains adjustments for auger height, speed, and the setting of skids based on conditions.
Details the process of installing and locking the side knife and connecting hydraulic pipes.
Provides initial settings and recommendations for concave and drum speed adjustment in hybrid systems.
Offers initial settings and advice for concave and drum speed adjustments in walker systems.
Explains the de-awning function and the importance of keeping the stone trap clean.
Discusses rotor speed importance and how to open/close rotor cover plates.
Details the straw curtain for material throw control and the Intensive Separation System (ISS).
Covers cleaning the preparation pan and adjusting fan speed and wind boards.
Explains sieve adjustment methods and monitoring returns for grain and chaff composition.
Details adjustments for the straw chopper and chaff spreader for optimal performance.
Provides a flow chart for troubleshooting and adjusting settings based on observed issues like straw pieces.
Continues the settings flow chart, covering issues like unthreshed heads and threshing grains in returns.
Offers a flow chart for adjusting settings based on problems like straw pieces and unthreshed heads in walker systems.
Explains the three main types of belt tensioners fitted to TUCANO combines and their adjustment.
Advice on cutterbar adjustment, skids, and lifter use for wet and laid crops.
Recommendations for stone trap emptying, cleaning, and chopper blade wear in wet conditions.
To Next Page