Threshing Hybrid
23
Drum speed can be adjusted by using the rotary dial on the arm rest(1) and
then switch(3), it is recommended that the drum speed is adjusted by 50rpm at
a time.
To obtain initial settings it is recommended that the suggested settings in the Operators
Manual are used, these are to only be used as a starting point, then adjustments should
be made from there. Often changing one thing can change another.
Only make one adjustment at a time.
Only do ‘Just Enough’ to avoid overloading the machine and using power unnecessarily.
Prime consideration here is to remove the
maximum amount of seed with the minimum of
damage to seed and straw. Over-threshing
cracks grains, produces more chaff and takes
more power.
The concave can be adjusted by using the rotary
dial(1) situated on the arm rest. Adjust the
concave no more than 2mm at a time.
Every 24 hours the concave is automatically
opened and closed.
To Next Page
Loading...
Need help?
General
