Threshing Walker
24
Drum speed can be adjusted by using the rotary dial(1), it is recommended that the
drum speed is adjusted by 100rpm at a time.
To obtain initial settings it is recommended that the suggested settings in the Operators
Manual are used, these are to only be used as a starting point, then adjustments should
be made from there. Often changing one thing can change another.
Only make one adjustment at a time.
Only do ‘Just Enough’ to avoid overloading the machine and using power unnecessarily.
Prime consideration here is to remove the maximum amount of seed with the
minimum of damage to seed and straw. Over-threshing cracks grains, produces more
chaff and takes more power.
The concave can be adjusted in CEBIS,
It is recommended that the concave is only adjusted by small amounts at a time.
TUCANO 320
TUCANO 430-450
To Next Page
Loading...
Need help?
General
