13
HOTKEY
HOTKEY
The HOTKEY (2) is used to adjust the more
frequently changing settings on the Combine
for example straw chopper or LASER PILOT
bias.
To adjust any of the HOTKEY values turn the
rotary switch (2) and the HOTKEY dial will
appear on CEBIS which is shown in the picture
below. Turn the dial to select the required icon
to make any adjustments.
After 5 seconds the HOTKEY dial
will disappear from CEBIS and the
settings will be displayed in the
window shown below. To change
the HOTKEY setting value turn
switch (4) either left or right to
either increase or decrease the
value.
To remove the adjusted settings
from the window turn the
HOTKEY switch (2) back to the
CEBIS (12 o’clock) position and
the previous settings will be
displayed.
To Next Page
Loading...
Need help?
General
