3
Safety
Safety is of the utmost importance whilst you are operating and maintaining your
combine harvester. Make sure that all of the risks are assessed to reduce the likelihood
of an accident.
Make sure you are familiar with the controls and operation of the machine and have
read the operators manual
The combine harvester has many moving parts, guards are designed to keep you
safe, please ensure that all guards are kept in place and in good condition when
operating the machine.
When doing any maintenance work or making adjustments outside of the machine
make sure that the engine is switched off and the battery isolator key is removed.
If you need to go underneath the front elevator/ cutterbar to make adjustments/
clean concaves, preparation pan, etc. Make sure that the cutterbar lift cylinder lock is
in place.
Some of the maintenance has to be carried out at height, please asses the risks that
this poses and ensure that the task is carried out safely.
When operating the machine be aware of the presence of people particularly in
farmyards, always get someone to help you when reversing in confined areas.
Be aware of the size of your machine, particularly the height, you may be at risk from
contact with overhead power lines and overhead obstructions particularly but not
exclusively when the graintank lids are up and if extra aerials have been fitted to your
machine.
For more in depth safety information please consult your operators manual. Other
information is available on the HSE website: www.hse.gov.uk
Always read the Operators Manual before using any new machine.
To Next Page
Loading...
Need help?
General
