6
Multifunction lever
1a. Front attachment lower
1b. Front attachment raise
1c. Pre set cutting height (slow lower when not threshing
out of gear)
1d. Pre set ground pressure (slow raise when threshing
not in gear)
4a. Reel lower
4b. Reel raise
4c. Reel forward
4d. Reel backwards
5. Front attachment stop
6. Grain tank auger on/off
7. Grain tank unloading tube
7a. Unloading tube swing out
7b. Unloading tube swing in
To Next Page
Loading...
