To Next Page
J
Jennifer CarterJul 26, 2025
How to release the hose if it locks up after being unwound on Claber Lawn and Garden Equipment?
- AaaroncookJul 26, 2025
To release the hose on your Claber Lawn and Garden Equipment, use the provided release tool following these steps: 1. Insert the release hook fully into the left side of the hose exit slot, ensuring the hook faces left. 2. Hook one of the teeth onto the external drum. 3. Pull the hook outward as far as possible. 4. Slowly release the hook inwards to unlock the drum. Rotate the hook slightly right to unhook and remove the tool. Now the hose can be rewound.
General
