CD Front Cover and Drive Assembly
Drawing No. Order No. Description Quantity
1 V3984-01 WS1CD FRONT COVER ASSEMBLY 1
2 V3107-01 WS1 MOTOR ASY 1
3 V3106-01 WS1 DRIVE BRACKET & SPRING CLIP 1
4 V3985CD-BOARD WS1 THRU 2L/2 CD PC 2 MAV BRD REPL 1
5 V3110 WS1 DRIVE REDUCING GEAR 12X36 3
6 V3109 WS1 DRIVE GEAR COVER 1
Not Shown
V3186 WS1 AC ADAPTER 120V-12V
1
V3186AUS WS1 AC ADAPTER 220-240V-12V AUST
V3186EU WS1 AC ADAPTER 220-240V-12V EU
V3186UK WS1 AC ADAPTER 220-240V-12V UK
V3186-01 WS1 AC ADAPTER CORD ONLY
Not Shown V3946 WS1 WIDE DRIVE BACK PLATE 1
Wiring For Correct On/Off Operation
PC Board Relay Terminal Block Relay
RLY 1 Coil -
V + Coil +
RLY 2 Coil -
Relay Specifi cations: 12V DC Relay with a coil resistance not
less than 80 ohms. If mounting the relay under the cover check
for proper mounting location dimensions on the backplate.
1
2
3
5
6
4
Battery replacement is
3 volt lithium coin cell
type 2032.
Correct
Battery
Orientation
Battery Fully Seated
When replacing the battery, align
positives and push down to fully seat.
AC Adapter U.S. International
Supply Voltage 120 V AC 230V AC
Supply Frequency 60 Hz 50 Hz
Output Voltage 12 V AC 12 V AC
Output Current 500 mA 500 mA
PC Board Relay
Terminal Block
Refer to Control Valve Service Manual
for other drawings and part numbers.
To Next Page
Loading...
