Clack Valve WS1.25 - User Manual

Water Specialist
1” Control Valve Series Model: WS1
1.25” Control Valve Series Model: WS1.25
Operation and Instruction Manual for OEM Only.
Please Note: This operation and instruction manual is for the training of
the OEM and for the OEM to use to train their customers. This document
is not to be used as the complete system manual.

Clack Valve WS1.25 Specifications

General

Model	WS1.25
Category	Control Unit
Valve Size	1.25 inches
Body Material	Noryl
Material	Noryl
Inlet/Outlet Connection	NPT
Connection Size	1.25 inches
Maximum Pressure	125 psi
Operating Pressure	20-125 psi
Turbine Meter Range	0.5-25 GPM
Flow Rate	25 GPM
Brine Line Connection	0.5 inches
Drain Line Connection	3/4 in NPSH
Electrical	120V/60Hz
Water Temperature	40 - 110 °F (4 - 43 °C)

Summary

Water Specialist

Operation and Instruction Manual for OEM Only

Manual intended for OEM training and customer instruction purposes.

Control Valve Function and Cycles of Operation

OEM General Instructions

OEM Softener System Setup

OEM Filter System Setup

Installer Display Settings

User Display Settings

Regeneration Mode

Manual Regeneration

How to manually trigger a regeneration cycle.

Set Time of Day

Process for setting the current time on the control valve.

Diagnostics

Valve History

Front Cover and Drive Assembly