Installation Operation Maintenance Manual
BIRM WS1 NOV 2007 \page
Regeneration
Programming
(All programming below is Factory set)
To alter settings – Press “” and “” keys
To back up at any stage – Press “REGEN”
To save any changes – Press “SET CLOCK”
Press and hold together for 5 seconds
“Filtering” will be flashing in top right corner
Set 1
st
cycle time in minutes –
BACKWASH set at 10 min
Set 2
nd
cycle time in minutes –RINSE set
at6min
Regen set to oFF
Regen set to NORMAL
Programming Finished –Return to time of
day
NEXT
NEXT
NEXT
NEXT
NEXT
NEXT
To Next Page
Loading...
