Why does my clage Water Heater feel too cold?
If the selected temperature on your clage Water Heater feels too cold, it might be because the set temperature is too low. A specialist can increase the set temperature for you.
Why is my clage DBX Water Heater temperature too hot?
If the selected temperature on your clage Water Heater feels too hot, the set temperature might be too high. A specialist can decrease the set temperature.
What to do if my clage Water Heater only produces cold water?
If your clage Water Heater is producing cold water, check if the master fuse has tripped. If it has, renew or activate the fuse.
How to fix weak hot water flow from clage Water Heater?
If the flow rate of hot water from your clage Water Heater is too weak, it could be due to a dirty or calcified outlet fitting. Try cleaning the shower head, jet regulator, or sieves. Alternatively, the fine filter might be dirty or calcified, so try cleaning the fine filter.
Why is my clage DBX not reaching the set temperature?
If your clage Water Heater isn't reaching the selected temperature, especially during winter, the water flow might be too high. Try reducing the water flow rate at the outlet.
General| Frequency | 50/60 Hz |
|---|---|
| Protection Class | IP25 |
| Control Type | Electronic |
| Type | Instantaneous Water Heater |
| Power Rating | 18 kW, 21 kW, 24 kW, 27 kW |
| Voltage | 400 V |
| Temperature Range | 30 °C to 60 °C |
| Power Supply | Three-phase |
To Next Page
