Need help?Do you have a question about the Clarion APX200.2 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Crossover Frequency | 50Hz - 500Hz |
| RMS Power @ 2 Ohms | 100W x 2 |
| Bridged RMS Power @ 4 Ohms | 200W x 1 |
| Signal-to-Noise Ratio | 90 dB |
| THD at Rated Power | 0.05% |
| Crossover | Variable High-Pass/Low-Pass |
Instructions for reading the manual and warranty information.
Explains front panel connections and audio control features.
Illustrates a bridged mono subwoofer system setup.
Shows a stereo system driving full-range or satellite speakers.
Demonstrates a mixed-mode satellite and subwoofer system configuration.
Advice on safely mounting the amplifier for cooling and stability.
Essential safety and best practices for amplifier wiring connections.
To Next Page
