Need help?Do you have a question about the Clarion APA2103 and is the answer not in the manual?
Power Output| maximum power output | 230 watts |
|---|---|
| continuous average power output at 4 ohms | 50 watts x 2 |
| continuous average power output at 2 ohms | 75 watts x 2 |
Audio Specifications| frequency response | 10 Hz to 50 kHz |
|---|---|
| signal-to-noise ratio | 100 dB or better |
| input sensitivity (low-level RCA) | 200 mV to 5 V |
Physical Specifications| dimensions (W x H x L) | 230 mm x 47.5 mm x 2.0 mm |
|---|---|
| current use at rated output | 14 amps |
| speaker load capacity | 4 ohms |
Details the front panel layout and components of the amplifier for easy identification and use.
Explains the rear panel connections for speakers and power supply, including terminal types and layout.
Illustrates a mono configuration using bridged channels to drive a subwoofer with higher power output.
Shows a stereo setup driving two speakers with 50W RMS each, suitable for full-range, satellite, or subwoofer applications.
Details a mixed-mode setup combining satellite speakers with a subwoofer using crossover component values.
Provides essential guidelines for safely mounting the amplifier, emphasizing ventilation and surface stability.
Outlines critical steps and warnings for making secure electrical connections to prevent damage and ensure proper function.
To Next Page
