Need help?Do you have a question about the Clarion apa2102 and is the answer not in the manual?
Power Output| maximum power output | 150 watts (75 watts x 2) |
|---|---|
| continuous average power output (4 ohms) | 50 watts x 2 |
| continuous average power output (2 ohms) | 75 watts x 2 |
| continuous average power output (bridged 4 ohms) | 125 watts x 1 |
Audio Performance| frequency response | 10 Hz to 50 kHz |
|---|---|
| signal-to-noise ratio | 100 dB or better |
| input sensitivity (low-level) | 200 mV to 5 V |
| input sensitivity (speaker-level) | 400 mV to 10 V |
Current and Load| current use | 14 amps |
|---|---|
| speaker load capacity | 4 ohms |
Weight and Dimensions| width | 230 mm |
|---|---|
| height | 47.5 mm |
| length | 226 mm |
Details the front panel layout including input jacks, controls, and power indicator.
Explains high-pass/low-pass filter and stereo/mono mode switch functions for audio tuning.
Details the rear panel connections for speakers and power supply, including fuse information.
Illustrates bridging the amplifier for mono operation to drive a 4-ohm subwoofer with 125 watts.
Shows 2-channel operation for full-range, satellite, or subwoofer speakers at 50W/channel into 4 ohms.
Explains mixed-mode operation for satellite and subwoofer systems using crossover components.
Guidelines for safely and effectively mounting the amplifier, ensuring proper cooling and stability.
Essential safety measures and best practices for connecting the amplifier's wiring.
Provides wire code information for speaker-level inputs on the APA2102 amplifier.
To Next Page
