Need help?Do you have a question about the Clarion APA4203 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| RMS Power at 4 Ohms | 50W x 4 |
| RMS Power at 2 Ohms | 75W x 4 |
| Bridged RMS Power at 4 Ohms | 150W x 2 |
| Frequency Response | 10Hz - 50kHz |
| THD at Rated RMS Power | < 0.05% |
| Input Sensitivity | 200 mV - 4 V |
| Signal-to-Noise Ratio | 90dB |
| Crossover Frequency | 50-200Hz |
| Bass Boost | 0-12dB |
| Crossover | LP/HP/Full |
Details the front panel layout, including inputs, controls, and indicators for the amplifier.
Describes the electronic filters for precise frequency attenuation on front and rear channels.
Explains the rear panel connections for speakers, power supply, and summed outputs.
Provides guidelines for safely mounting the amplifier to ensure proper cooling and stability.
Outlines essential steps and safety measures for connecting the amplifier's power and speaker wires.
To Next Page
