Clarion apa2102 - Introduction to Clarion APA2102 Amplifier

OPERATION/INSTALLATION MANUAL
INTRODUCTION
Thank you for purchasing a Clarion APA2102 2-channel car audio
amplifier. You’ve selected an amplifier that is one of the finest available on
the market today. The APA2102 puts out 50 watts of continuous power
into a 4-ohm load and delivers 75 watts (typical) into a 2-ohm load. It also
comes with the following features:
♦ Full frequency response with low distortion and exceptional signal-to-
noise performance
♦ Advanced circuit design features bridgeable and mixed-mode
operation for use in various systems, including those with satellite
speakers and/or subwoofers
♦ Variable high-pass/low-pass electronic crossover with an 12 dB per
octave slope and full adjustment range (from 50 to 200 Hz) to aid in
audio system design
♦ Variable bass extender circuit to reinforce low frequency signals that
may be lost due to box design
♦ Ground loop isolation inputs with adjustable input level controls to
accept a wide range of input signals
♦ Remote turn-on with “soft-start” muting to prevent turn-on “thump”
♦ Regulated MOSFET power supply with low AM RFI and protection
circuits for overheating and speaker shorts
♦ 2-ohm load capability to drive a variety of speaker systems
♦ Gold-plated input/output connectors and an external automotive-type fuse
♦ Aluminum heat sink for efficient dissipation of heat
♦ Low profile, compact size for space-limited installations
In order to start enjoying your new Clarion APA2102 2-channel car audio
amplifier as soon as possible, please read the remaining pages to plan your
installation. When you’re finished, fill out and send in the enclosed
warranty card to protect your purchase and to aid us in any service-related
questions. Also, save your original bill of sale as a proof of purchase.
Introduction ♦ 1