Owner’s Manual
7
Figure 4 - In this application, the amplifier is used in stereo and drives two
full-range (or satellite or subwoofer) speakers. NOTE: A passive crossover
must be used with satellite speakers.
2-Channel Full-Range, Satellite, or Subwoofer Stereo System
Set X-Over Mode as shown
Set X-Over Mode as shown;
adjust FREQ to speaker
specifications.
Set X-Over Mode as shown;
adjust FREQ to speaker
specifications.
apx201.qxd 12/5/01 12:57 PM Page 7
To Next Page
Loading...
