Radio
Operations
I
Mute
Use this function to turn off the sound
immediately.
1.
Press the [..-/II/MUTE] button.
The sound turns off and "MUTE" appears in
the display.
2.
Press the [..-/II/MUTE] button again to
cancel the mute mode.
Tuning
There are 3 types of tuning mode available,
seek
tuning, manual tuning and preset tuning.
Seek
tuning
1.
Press the [AM/FM] button and select the
desired band (FM or AM).
*
If
"MANU"
is
lit
in
the
display,
press the
[SEEK/MAN] button. "MANU"
in
the display
goes
off,
and
seek tuning
is
now available.
2.
Press the [
........
]
or
[
....
~]
button to
automatically seek a station.
When the [
....
~]
button
is
pressed, the station
is sought in the direction of higher frequencies;
if the [
........
button
is
pressed, the station
is
sought
in
the direction of lower frequencies.
Manual
tuning
There are 2 manual tuning methods available:
Quick tuning and step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [AM/FM] button and select the
desired band (FM or AM).
* If "MANU"
is
not lit
in
the display, press
the
[SEEK/MAN] button. "MANU"
is
lit
in
the
display and manual tuning
is
now available.
2.
Tune in a station.
•
Quick
tuning:
Press and hold the [.......] or [
....
~]
button for
1 second
or
longer to tune in a station.
•
Step
tuning:
Press the [.......] or
[~]
button to manually
tune
in
a station.
14
CM04A
Recalling
a
preset
station
A total of
24
preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exist to store individual radio
stations in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio
frequency automatically.
1.
Press the [AM/FM] button and select the
desired band (FM
or
AM).
2. Press the corresponding [DIRECT] button to
recall the stored station.
* Press
and
hold
one
of
the [DIRECT} buttons
for 2 seconds or longer to store the current
station into preset
memory.
Manual
memory
1.
Select the desired station with seek tuning,
manual tuning
or
preset tuning.
2.
Press and hold one of the [DIRECT] buttons
for 2 seconds
or
longer to store the cu rrent
station into preset memory.
To Next Page
Loading...
Need help?
General
