CD Operations
Loading
a
CD
1.
Open the front panel by pressing the [OPEN]
button.
* Press
the
button firmly.
If
the front panel does
not open
fully,
gently open
it
with your hand.
2.
Insert a CD into the center of the [CD SLOT]
with the label side facing up, and completely
close the front panel.
The CD plays automatically after loading.
Listening
to
a CD
already
inserted
I
Press the [CD/CDC] button to select the CD
mode. Play starts automatically. If no CD
is
loaded in the unit, "NO DISC" appears
in
the
display.
Pausing
play
1.
Press and hold the
[~/Il/MUTE]
button for 1
second
or
longer to pause play. "PAUSE"
appears
in
the display.
2.
To
resume CD play, press and hold the
[~/Il/MUTE]
button for 1 second or longer
again.
Selecting
a
track
.Track-up
1.
Press the [
....
~]
button to move ahead to the
beginning of the next track.
2.
Each time you press the [
........
1]
button, the
track advances ahead to the beginning of the
next track.
• Track-down
1.
Press the [.......] button to move back to the
beginning of the current track.
2.
Press the [.......] button twice to move to the
beginning of the previous track.
Fast-forward/fas
t-re
wind
•
Fast-forward
Press and hold the [
....
~]
button for 1 second or
longer.
• Fast-rewind
Press and hold the [.......] button for 1 second or
longer.
Scan
play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This
function continues on the disc until it is
cancelled.
*'
The
scan
play
is
useful when
you
want
to
select a
desired track.
1.
Press the [SCAN] button.
2.
To
cancel the scan play, press the [SCAN]
button again.
For
single
CD
(8
em)
CD
SLOT
For
CD
(12 em)
Notes:
• Never insert foreign objects into the CD
SLOT
•
If
the CD is
not
inserted easily, there may be
another
CO
in the mechanism
or
the unit
may
require service.
• Discs
not
bearing the
illJD~rrg
mark
and
CD-ROMs
cannot be
played
by
this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Loading
8
cm
compact
discs
No
adapter
is
required
to
play
an
8
cm
CD.
*'
Insert
the
8
cm
CD
into
the
center
of
the
insertion
slot.
Ejecting
a CD
1.
Open the front panel by pressing the [OPEN]
button.
* Press the button firmly.
If
the
front panel does
not open
fully,
gently open
it
with
your hand.
2.
Press the
[~]
button to eject the
CD.
Take
it
out from the ejected position.
Notes:
• Forcing a CO into the
CO
mechanism can
damage the CO
or
source unit.
The
CD will automatically load
after
being placed
approximately 1/3rd
of
the way into the CD
mechanism.
•
If
a CO (12 em) is left
in
the ejected position for
15
seconds, the CO is automatically reloaded
(Auto reload).
• 8 cm CDs are
not
auto reloaded. Be sure to
remove it when ejected.
CMD4A
15
To Next Page
Loading...
Need help?
General
