iPod
Operations
3.
Turn the [ROTARY] knob
to
select the menu,
then press the [
..
~]
button. Select tracks by
repeating this operation.
Notes:
•
The
number
of
repeating operation is differ
depending
to
the selected menu.
•
To
return
to
the previous list, press the
[~l
button. However, you cannot return to the menu
of
the step 2. Perform the operation from the step 1
again.
CD Changer Operations
CD
changer
functions
When an optional CD changer is connected
through the
CeNET
cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
Press the [CD/CDC] button to select the CD
changer mode to start play. If 2 CD changers
are connected, press the [CD/CDC] button to
select the CD changer for play.
*
If
"NO
MAG" appears
in
the display, insert the
magazine into the
CD
changer. "DISC CHK"
appears
in
the display while the player loads
(checks) the magazine.
*
If
"NO
DISC" appears
in
the
display, eject the
magazine
and
insert discs into each slot. Then,
reinsert the magazine back into the
CD
changer.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
I
Depending
on
the
recording
format, CD-ROM
discs
may
not
play properly.
Pausing
play
1.
Press and hold the
[~/II/MUTE]
button for 1
second or longer to pause play.
"PAUSE"
appears in the display.
2.
To
resume CD
play,
press and hold the
[~/III
MUTE] button for 1 second or longer again.
Selecting
a CD
1.
Press the
[f-DISC~]
button to select the
desired disc.
*
If
a
CD
is
not loaded
in
a slot of magazine,
pressing the
[~DISC~]
button
can
not work.
Selecting
a
track
.Track-up
1.
Press the [
..
~]
button to move ahead to the
beginning of the next track.
2.
Each time you press the [
..
~]
button, the
track advances ahead to the beginning of the
next track.
• Track-down
1.
Press the [
........
] button to move back to the
beginning of the current track.
2. Press the [
........
] button twice to move to the
beginning of the previous track.
CMD4A
23
To Next Page
Loading...
