USBIMTP Operations
Connecting a USB memorylMTP
device
1.
Connect
the
USB
memory/MTP
device to the
USB
cable.
Playback will begin from the first file
recorded on the device.
*
If
the device
is
not recognized, press the
[SRC] button to switch the source
to
the
device.
* Always insert the device fully into the
connector. Incomplete connections may
cause the device not
to
be
recognized.
* Depending
on
the number of tracks recorded,
some amount
of
time may
be
required until all
tracks are read into the unit.
* The order
in
which tracks are recorded may
differ depending
on
the device connected (the
actual playback order may not
be
the same
as
that indicated
on
your computer's display).
To
listen
to
tracks
on
a connected
USB memorylMTP device
1.
Press the [SRC] button to switch the source.
When
USB
memory/MTP
device is selected,
playback (except
DRM file) will begin from
the location
at
which playback was
previously stopped.
* When a USB memory/MTP device
is
connected the USB/MTP mode will be
displayed.
* When a USB memory/MTP device is
disconnected and then reconnected, playback
will begin from the beginning of the USB
memory/MTP device.
* When the "MTP" mode
is
selected, the AAC
files on the
MTP device can not
be
played.
To
stop play
1. Press the [SRC] button and switch the
function to a source other than the
USB
memory.
A CAUTION
Do not remove the USB memory/MTP device
when the USB/MTP mode is selected, since it
may
result in loss or damage to data on the
USB memory/MTP device.
Always backup and save important data on
your computer.
2. Remove the
USB
memory/MTP
device from
the
USB
cable.
28
CX400
USBIMTP Operations
Connecting a USB memorylMTP
device
1.
Connect
the
USB
memory/MTP
device to the
USB
cable.
Playback will begin from the first file
recorded on the device.
*
If
the device
is
not recognized, press the
[SRC] button to switch the source
to
the
device.
* Always insert the device fully into the
connector. Incomplete connections may
cause the device not
to
be
recognized.
* Depending
on
the number of tracks recorded,
some amount
of
time may
be
required until all
tracks are read into the unit.
* The order
in
which tracks are recorded may
differ depending
on
the device connected (the
actual playback order may not
be
the same
as
that indicated
on
your computer's display).
To
listen
to
tracks
on
a connected
USB memorylMTP device
1.
Press the [SRC] button to switch the source.
When
USB
memory/MTP
device is selected,
playback (except
DRM file) will begin from
the location
at
which playback was
previously stopped.
* When a USB memory/MTP device
is
connected the USB/MTP mode will be
displayed.
* When a USB memory/MTP device is
disconnected and then reconnected, playback
will begin from the beginning of the USB
memory/MTP device.
* When the "MTP" mode
is
selected, the AAC
files on the
MTP device can not
be
played.
To
stop play
1. Press the [SRC] button and switch the
function to a source other than the
USB
memory.
A CAUTION
Do not remove the USB memory/MTP device
when the USB/MTP mode is selected, since it
may
result in loss or damage to data on the
USB memory/MTP device.
Always backup and save important data on
your computer.
2. Remove the
USB
memory/MTP
device from
the
USB
cable.
28
CX400
To Next Page
Loading...
Need help?
General
