What to do if my Clarion CZ305 Car Receiver unit can not power on?
If your Clarion Car Receiver unit fails to power on, the unit fuse or the car battery fuse may be blown. Replace the blown fuse with a new fuse of the correct rating.
Why won't my device pair via Bluetooth with my Clarion Car Receiver?
If the Clarion Car Receiver cannot pair with a Bluetooth-enabled device, it may be because the device does not support the profiles required for the system. In this case, use another device to connect. It could also be that the Bluetooth function of the device is not enabled. Refer to the user manual of the device for how to enable the function.
Why is the audio quality poor with Bluetooth on my Clarion Car Receiver?
If the audio quality is poor after connecting your device to the Clarion Car Receiver via Bluetooth, it could be due to the microphone not being correctly positioned. Try adjusting the microphone's position, such as sticking it onto the dashboard near the driver. Alternatively, poor Bluetooth reception could be the cause. Try moving the device closer to the audio system or removing any obstacles between the device and the system.
Why does my Clarion Car Receiver reset when the engine is off?
If your Clarion Car Receiver unit resets itself when the engine is off, it is likely due to an incorrect connection between the ACC and the battery. Check the wiring and correct it to resolve this issue.
Why does my Clarion Car Receiver sound skip or is noisy?
If the sound from your Clarion Car Receiver skips or is noisy, the MP3/WMA files may not be encoded properly. Use properly encoded MP3/WMA files.
Why I cannot pair my device with Clarion CZ305 Car Receiver via Bluetooth?
If you cannot pair your Bluetooth-enabled device with the Clarion Car Receiver, the device might not support the profiles required for the system (use another device to connect). Also, the Bluetooth function of the device may not be enabled (refer to the user manual of the device for how to enable the function).
What to do if my Clarion CZ305 sound skips or is noisy?
If the sound from your Clarion Car Receiver skips or is noisy, the compact disc might be dirty (clean it with a soft cloth) or heavily scratched or warped (replace it with a compact disc with no scratches).
General| MP3 playback | Yes |
|---|---|
| AM band range | 530 - 1710 kHz |
| FM band range | 87.9 - 107.9 MHz |
| Supported radio bands | AM, FM |
| Display type | LCD |
| DIN size | - |
| Impedance | 4 Ω |
| Output power | - W |
| Product color | Black |
| Disc types supported | CD-R, CD-RW |
| Audio output channels | 4.0 channels |
| Maximum power per channel | 21 W |
| Signal-to-Noise Ratio (SNR) | 93 dB |
| USB version | 2.0 |
| Bluetooth version | 2.1+EDR |
| USB ports quantity | 1 |
| Output voltage | 4 V |
Weight and Dimensions| Weight | 2970 g |
|---|
Details compliance with FCC rules, including interference and radiation exposure.
Diagram and explanation of the front panel controls and their functions.
Detailed explanation of each button's function in different modes.
Covers power on/off, volume adjustment, source selection, and display settings.
Guide to adjusting EQ, balance, fader, and other audio parameters.
Instructions for selecting radio bands, manual/auto tuning, and preset storage.
Pairing, making calls, and streaming audio wirelessly via Bluetooth.
Explanation of various advisory messages from SiriusXM service.
Step-by-step guide for physically installing the main unit into the vehicle.
Detailed diagrams and instructions for connecting all wires and cables.
To Next Page
