Transmisor de senal
-7f-tt---
[ BNDJ
..----f+----
[ ., II J
~-++---[DISpJ
~-++---[RDMJ
------++----
[ RPT J
[ MUTEJ
---++----ff-e
[ISR]
[SCN]
SRC
[SRCJ--+t-~
Clarion
Inserting the Battery
1.
Turn over the remote control until and slide the
cover
in
the direction indicated by the arrow
in
the illustration.
2. Insert the
battery
(CR2025) into the insertion
guides, with the printed side (+) facing
upwards.
3.
Press the battery
in
the direction indicated
by
the
arrow so that it slides into the compartmet.
4.
Replace
the
cover
and
slide
in until it
clicks
into place.
Notes:
Misuse
may
result
in
rupture
of
the
battery, producing
leakage of fluid and resulting
in
personal injury or
damage to surround materials. Always follow these
safety precaution:
• Use
only
the designate battery.
• When replacing the battery, insert properly, with
+/- polarities oriented correctly.
•
Do
not
subject battery
to
heat,
or
dispose
of
in
fire
or
water.
Do
not attempt to disassemble the battery.
• Dispose
of
used batteries properly.
9
To Next Page
Loading...
Need help?
General
