Compact disc cannot be
loaded.
Sound skips or is noisy.
Sound is bad directly after
power is turned on.
Nothing happens when
button are pressed.
Display is not accurate.
Incorrect wiring.
Another compact disc is
already loaded.
Compact disc is dirty.
Compact disc is heavily
scratched
or
warped.
Water droplets may form on
the internal lens when the car
is parked in a humid place.
The microprocessor has
malfunctioned due to noise,
etc.
Replace with a fuse of the same amperage. If
the fuse blows again, consult your store of
purchase.
Consult your store of purchase.
Eject the compact disc before loading the new
one.
Clean the compact disc with a soft cloth.
Replace with a compact disc with no scratches.
Let dry for about 1 hour with the power on.
Turn off the power, then press the [OPEN]
button and remove the DCP.
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with
are dirty. cleaning alcohol.
• To protect the system,
this
unit
has been equipped with self diagnostic functions. If a fault
arises, a warning is issued
by
various error displays. Follow the corrective measures and
remove the fault.
ERROR 2
ERROR 3
ERROR 6
14
08255
This error display indicates that a fault has arisen
in
the
mechanism of the source unit (for example, the disc cannot be
ejected).
7 Check the source unit.
Thi's error display indicates that the pickup focus is off because
of
a scratched disc or some other factor during source unit play.
7 Check the compact disc.
This indicates that the CD's TOC (table of contents) cannot be
read, for example because the selected disc is upside-down.
To Next Page
Loading...
Need help?
General
