The control panel can
be
detached to prevent
theft. When detaching the control panel, store it
in
the DCP (Detachable Control Panel) case to
prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Removing
the
DCP
1.
Press the [SRC] button for 1 second or longer
to switch off the power.
Be
sure
to
close
the
HOLD FLAP
for
safety
when
removing
the
DCP.
Attaching
the
DCP
1.
Insert the right side of the DCP into the main
unit.
2.
Insert the left side of the DCP into the main
unit.
•
POWER
II
SRC
~
4.
Close the HOLD FLAP.
• The DCP can easily be damaged
by
shocks.
After
removing
it, be careful
not
to
drop
it
or
subject
it
to
strong
shocks.
• If
the
FLIP DOWN PANEL
is
kept open,
the
DCP
may
drop
due
to
vibration
of
the car.
This
results
in damage
to
the DCP. So
close
the
FLIP DOWN PANEL
or
remove
the
DCP
to
store
into
the
case.
• The
connector
connecting
the
main
unit
and
the
DCP
is
an extremely
important
part. Be
careful
not
to
damage
it
by
pressing on
it
with
fingernails, pens, screwdrivers, etc.
3.
Pull the DCP toward
you
and remove
it.
2.
Press
in
the [OPEN] button.
*If the flip down panel does not open fully, gently
open it with your hand.
t[OPENJ
button
~~
~~
eli
HOLD
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
08255
7
To Next Page
Loading...
Need help?
General
