10 EQS746
English
Tools and additional components
You will need:
• A Phillips-head screwdriver when mounting the unit in the vehicle
• A small flat-head screwdriver to adjust the AUX gain controls if you connect an MP3
player or video source
• High-quality RCA input and output cables
Extra cable can cause signal loss and act as an antenna for noise. Use only high-
quality RCA cables that are no longer than necessary to make a direct connection
with the source unit and amplifiers.
Mounting diagram
EQS746_OwnersManual.pmd 2005-12-02, 16:1310
To Next Page
Loading...
