Clarion M335 - Main PWB Removal Procedure; Step-by-Step Removal Guide

- 14 -- 14 -
- 14 -- 14 -
- 14 -
M335/M235M335/M235
M335/M235M335/M235
M335/M235
figure 1
No Part Number Part Name QTY
A 311-1848-00 LOWER CASE 1
B 039-2250-00 MAIN PWB 1
C 816-2620-00 FLAT WIRE 1
D 731-3005-81 TAPTIGHT 3
E 929-0221-80 MECHANISM 1
F 313-1872-00 HEAT SINK 1
G 731-3012-80 TAPTIGHT 2
H 714-3006-81 MACHINE SCREW 2
I 731-3008-80 TAPTIGHT 4
J 714-2012-81 MACHINE SCREW 1
K 714-2606-87 MACHINE SCREW 2
L 370-6043-00 INNER ES 1
B
Step 1
Remove all screw from Heat Sink
Step 2
Remove Heat Sink, (F)
Step 3
Remove Lower Case, (A)
Step 4
Remove all screw from Inner ES(L)
Step 5
Remove Inner ES(L)
Step 6
Unsolder 3 point on the Main PWB,
(B) figure 1
Step 7
After unsolder Main PWB remember
to remove flat wire (C) between Main
PWB (B), and Mechanism, (E)
Step 8
Remove Main PWB, (B)
Step 9
Unscrew the mechanism from the upper
case, (D)
View from bottom side
REMOVING MAIN PWB FOR REPAIR