Clarion M335 User Manual

- 3 -- 3 -
- 3 -- 3 -
- 3 -
M335/M235M335/M235
M335/M235M335/M235
M335/M235
To protect the system, this unit has been equipped with self diagnostic functions. If a fault arises, a warning is
issued by various error displays. Follow the corrective measures and remove the fault.
This error display indicates that a fault has arisen in the mechanism of the
source unit (for example, the disc cannot be ejected).
-Check the source unit
This error display indicates that the pickup focus is off because of a scratched
disc or some other factor during source unit play.
-Check the compact unit
This indicates that the CD’s TOC (table of contents) cannot be read, because
the selected disc is upside-down.
Error Display
Corrective Measure
ER2
ER3
ER6
ERROR DISPLAYS
CauseCause
CauseCause
Cause
ProblemProblem
ProblemProblem
Problem
MeasureMeasure
MeasureMeasure
Measure
Power does not turn on (or no
sound is produced).
Fuse is blown. Replace with a fuse of the same amperage as the
old fuse.
Compact disc cannot be
loaded.
Eject the compact disc before loading the new
one.
Another compact disc is already
loaded.
Sound skips or is noisy.
Clean the compact disc with a soft cloth.
Compact disc is dirty.
Replace with a compact disc with no scratches.
Sound is bad directly after
power is turned on.
Water droplets may form on the
internal lens when the car is
parked in a humid place.
Let dry for about 1 hour with the power on.
Compact disc is heavily scratched
or warped.
TROUBLESHOOTING
AREA CHANGE
Use this function when you are using the boat stereo anywhere outside the U.S.
Switchable frequency spacingSwitchable frequency spacing
Switchable frequency spacingSwitchable frequency spacing
Switchable frequency spacing
This boat stereo is initially set to tune in frequency intervals of 10 kHz for AM and 200 kHz for FM, the standard
calibrations in the U.S. When using the unit outside the U.S., use the following procedure to switch the frequency
range. The table below lists the frequency specifications for the U.S. and other countries.
Initial SettingInitial Setting
Initial SettingInitial Setting
Initial Setting
(U.S. standards)
Frequecy spacing
New SettingNew Setting
New SettingNew Setting
New Setting
(Australia standard)
New SettingNew Setting
New SettingNew Setting
New Setting
(Europe standards)
10 kHz 9 kHz
9 kHz
Frequecy range 530 to 1,710 kHz 531 to 1,602 kHz
531 to 1,602 kHz
Frequecy spacing
200 kHz 50 kHz
50 kHz
Frequecy range 87.9 to 107.9 kHz 87.0 to 108 kHz
87.5 to 108 kHz
AMAM
AMAM
AM
FMFM
FMFM
FM
Switch the area changeSwitch the area change
Switch the area changeSwitch the area change
Switch the area change
Australia standard (New Setting)Australia standard (New Setting)
Australia standard (New Setting)Australia standard (New Setting)
Australia standard (New Setting)
While pressing the
[A-M][A-M]
[A-M][A-M]
[A-M] button, press the
[RPT}[RPT}
[RPT}[RPT}
[RPT} buton, then “Australia standard” will be selected.
Inside U.S. standard (Initial Setting)Inside U.S. standard (Initial Setting)
Inside U.S. standard (Initial Setting)Inside U.S. standard (Initial Setting)
Inside U.S. standard (Initial Setting)
While pressing the
[A-M][A-M]
[A-M][A-M]
[A-M] button, press the
[SCN}[SCN}
[SCN}[SCN}
[SCN} buton, then “U.S. standard” will be selected.
Europe standard (New Setting)Europe standard (New Setting)
Europe standard (New Setting)Europe standard (New Setting)
Europe standard (New Setting)
While pressing the
[A-M][A-M]
[A-M][A-M]
[A-M] button, press the
[RDM}[RDM}
[RDM}[RDM}
[RDM} buton, then “Europe standard” will be selected.

Clarion M335 Specifications

General

Brand	Clarion
Model	M335
Category	Marine Audio
Language	English