User Manual.doc
- 113 / 156 -
５-９-４． RPT
Function RPT Mode of Bluetooth Audio
Operation
of button
Touch the RPT / RDM key for less than 0.5sec
Detail
It will switch to next RPT Mode like following if you touch the RPT / RDM key for less than 0.5sec.
REPEAT
OFF
→
ALL
REPEAT
→
FOLDER
REPEAT
→
TRACK
REPEAT
→
REPEAT
OFF
It is unable to control completely by the set. Each state of operation depends on specification of connecting device.
Initial state depends on the connecting device.
It will display the RPTMode for 3sec when you switch to RPT Mode, then it display P-TIME. It will return to the last
display.
RPT indicator is ON in RPT Mode.
It depends on the connecting device to keep RPT Mode or not when you turn ACC/POWER OFF or switch to
othersource mode.
The state after operation depends on the specification connecting device.
Releasing RPT Mode depends on the connecting device.
To Next Page
Loading...
