User Manual.doc
- 127 / 156 -
５-１０-６． Incoming Call
Function The function of taking a call.
Operation
of button
The following operation is effective when a call incoming.
Answer the call ： Answer the call by touching the OFF HOOK key
Response Pending ： Short touching the ON HOOK key for Response Pending
Refuse the call ： Long touching the ON HOOK key for refusing the call
Adjust the incoming volume ： Touch the VOL+ or VOL- key
Detail
It is able to adjust the incoming volume when incoming a call.（Value Range:0～14 Initial Value ： 7）
Incoming volume will return to the initial value when next call incomes, even it is adjusted when a call incoming.
It will go to the last mode when incoming calls end.
No Voice Commands are effective.
To Next Page
Loading...
