User Manual.doc
- 31 / 156 -
５-４． Operation of Satellite Radio(XM)
５-４-１． Call /switch to XM mode
Function Call /Switch to XM mode
Operation
of button
Touch SAT key
Detail
If you touch the SAT key when it is in other source mode, it will start to receive the channel signal of last band and
last memory of XM.
It is effective when POWER OFF.
The XM band will switch to next like the following when you touch SAT key in XM mode.。
XM1 → XM2 → XM3 → XM1
※ The display will be "SAT" but not "XM".
When receiving channel signal, it will go to the last mode after displaying the channel No. for 3 seconds.
Initial setting is BAND1 (XM1) and CHANNEL001 (PREVIEW CHANNEL).
To Next Page
Loading...
