User Manual.doc
- 51 / 156 -
５-６． Media HUB Operation
５-６-１． Call /Switch Media HUB Mode
Function Call /Switch Media HUB Mode
Operation
of button
Touch the "SAT" key.
Detail
If you touch the "SAT" key when it is in other source mode, it will start to receive the channel signal of last band and
last memory of XM/MEDIA.
If you touch the "SAT" key in Media HUB mode, it will switch to next like following.。
XM1/SR1 → XM2/SR2 → XM3/SR3 → MEDIA1 → MEDIA2 → XM1
※When XM/SR1-3 is chosen, it will display SAT1-3.
Common Specification
It is effective when POWER OFF.
When you select MEDIA1/ MEDIA2, it will display MEDIA1/ MEDIA2.
When receiving channel signal, it will go to the last mode after displaying the channel No. for 3 seconds.
□ The pass key to connect BT Audio is "0000".
To Next Page
Loading...
