48 VRX745VD
English
Owner’s manual
Seek tuning
1. Press the [BAND] button and select the
desired TV band (TV1 or TV2).
∗ The same operation can be performed by
touching the screen to display the menu
screen, then touching the [BAND] key.
∗ If “MANU” is lit in the display, press and hold
the [BAND] button for 1 second or longer.
“MANU” in the display goes off and seek
tuning is now available.
2. Press the [d] or [a] button to
automatically seek a station. Press the [d]
button to automatically tune up the frequency
band to the next available TV station; press
the [a] button to automatically tune down.
∗ The same operation can be performed by
touching the screen to display the menu
screen, then touching the [å] or [∂] key.
Selecting with a station number
1. Touch the screen to display the menu, then
touch the [SRCH] key.
2. Touch the [0]~[9] key corresponding with the
station you desired. When you touch the
wrong number ([0]~[9] key), you can cancel
that to touch the [CLR] key.
3. Touch the [ENT] key. The radio station you
required would be tuned.
4. Touch the [ESC] key.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning. When you are in the step tuning
mode, the frequency changes one step at a
time. In quick tuning mode, you can quickly tune
the desired frequency.
1. Press the [BAND] button and select the
desired band. (TV1 or TV2)
∗ The same operation can be performed by
touching the screen to display the menu
screen, then touching the [BAND] key.
∗ If “MANU” is not lit in the display, press and
hold the [BAND] button for 1 second or longer.
“MANU” appears in the display and manual
tuning is now available.
2. Tune into a station.
● Quick tuning:
Press and hold the [d] or [a] button for 1
second or longer to tune in a station.
TV Operations
● Step tuning:
Press the [d] or [a] button to manually tune
in a station.
Notes:
•
The same operation can be performed by touching
the screen to display the menu screen, then
touching the
[
å
]
or
[
∂
]
key.
•
Manual tuning is cancelled if you do not operate the
unit for 7 seconds longer. (
∗
Only when connecting
the TTX7503Z or TTX7504Z with this unit)
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your
favorite TV stations and store them in memory
for later recall.
There are 2 ways available to recall the preset
station.
● Using the [DIRECT] button
1. Press the [BAND] button and select the
desired TV band. (TV1 or TV2)
2. To recall a stored TV station, press the
desired [DIRECT] button to select that
station.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into the preset memory.
● Using the LIST screen
1. Touch the screen to display the menu, then
touch the [LIST] key.
2. Touch the corresponding [DIRECT] key to
recall the stored station.
∗ You can select the desired band to touch the
[BAND] key.
∗ Touch and hold one of the [DIRECT] key for 2
seconds or longer to store the current station
into the preset memory.
3. Touch the [RTN] key to return to the previous
mode.
Manual memory
● Using the [DIRECT] button
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station to that preset memory.
● Using the LIST screen
1. Press the [BAND] button and select the
desired TV band. (TV1 or TV2)
To Next Page
Loading...
