10 VRX745VD
English
Owner’s manual
6.
OUTLINE OF BUTTON AND TOUCHKEY
OPERATION
∗1
∗2
Engine ON
position
System check
The CeNET format utilized on this unit is
provided with a system check function. The
operation panel’s system check menu is
displayed under the following conditions:
• When power is first turned on after initial
installation.
• When an external device is connected or
disconnected.
• When batteries are changed or otherwise
when power is disconnected.
• When reset button is pressed.
∗ In addition to the above conditions, when the
liquid crystal panel is open and the “PUSH
POWER KEY” message is displayed, the
system check screen can be displayed by
pressing the [FUNC] button.
To Next Page
Loading...
Need help?
General
