Why won't my Clarion NX405 Car Receiver turn on?
If your Clarion Car Receiver isn't powering on and no sound is produced, it could be due to a blown fuse. Replace the fuse with one of the same amperage. If it blows again, it may also be due to incorrect wiring, which requires consulting your installation center.
What to do if video images are not displayed on my Clarion NX405 Car Receiver?
If video images are not displayed on your Clarion Car Receiver, ensure that the parking brake is engaged.
Why is my Clarion NX405 remote not working?
If the remote control for your Clarion Car Receiver isn't working, it might be due to direct sunlight interfering with the light-receptive part of the unit. Also, check the remote's battery to ensure it's not dead or missing.
How to fix sound skipping on Clarion Car Receiver?
If the sound from your Clarion Car Receiver skips or is noisy, the disc may be dirty. Clean it with a soft cloth. Alternatively, the disc might be heavily scratched or warped, requiring a replacement with a disc in good condition.
What to do if buttons don't work on my Clarion Car Receiver?
If nothing happens when you press the buttons on your Clarion Car Receiver and the display is inaccurate, the microprocessor may have malfunctioned. Press the reset button with a thin rod. Note that this will clear stored radio frequencies and titles. Be sure to turn off the ACC power when pressing the Reset button.
Why won't my Clarion Car Receiver load a disc?
If your Clarion Car Receiver won't load a disc, it may be because a disc is already loaded. Eject the current disc before loading a new one. It could also be due to foreign matter in the disc slot, which should be removed.
Why does my Clarion NX405 sound bad when first turned on?
If the sound quality of your Clarion Car Receiver is poor immediately after turning it on, condensation may have formed on the internal lens. Let it dry for about 1 hour with the power on.
What does 'Parental Violation' mean on my Clarion NX405?
If your Clarion Car Receiver displays “PARENTAL VIOLATION” and won't play the disc, the content exceeds the set parental level. Release the view limitation or change the parental level.
How to fix a Clarion Car Video System when the power does not turn on?
If your Clarion Car Video System isn't powering on and no sound is produced, the fuse might be blown. Replace it with a fuse of the same amperage. If it blows again, it's recommended to consult your store of purchase. Also, incorrect wiring can cause this issue, so it's best to consult your installation center.
Why is my Clarion Car Video System remote control not working?
If your Clarion Car Video System's remote control isn't working, it could be due to direct sunlight interfering with the light-receptive part. Shield the unit from direct sunlight. Also, check the remote's battery to ensure it is not dead or missing.
General| Brand | Clarion |
|---|---|
| Model | NX405 |
| Category | Car Receiver |
| Language | English |
To Next Page
