Why Clarion Car Receiver disc cannot be played?
If your Clarion Car Receiver cannot play a disc, the file system may not be correct. Use ISO9660 level 1/2, Romeo, Joliet, or Apple ISO file system for CD-R/RW, or UDF for DVD±R/RW.
How do I fix skipping sound on my Clarion Car Receiver when playing MP3 files?
If your Clarion Car Receiver is skipping or producing noisy sound, ensure that MP3/WMA/AAC files are encoded properly.
Why won't my Clarion NX700 turn on?
If your Clarion Car Receiver isn't powering on and no sound is produced, the fuse might be blown. Replace it with a fuse of the same amperage. If it blows again, it could be due to incorrect wiring. In this case, it is recommended to consult your store of purchase.
Why is the display on my Clarion Car Receiver so dark?
If your Clarion Car Receiver display is dark, there could be several reasons: * The Dimmer control might be set too low. Try adjusting the dimmer. * The operating temperature might not be optimal. Aim for around 25°C and check again. * If the vehicle's headlights are on, the display is designed to dim to prevent glare at night.
Why is there no image displayed on my Clarion NX700 Car Receiver?
If the image is not displayed on your Clarion Car Receiver, the parking brake may not be engaged. Check that the parking brake is engaged.
Why are there red, green and blue points in the display of my Clarion NX700 Car Receiver?
This is not a failure, but a phenomenon peculiar to a liquid crystal display. The liquid crystal display is produced according to technology with very high precision. Note that, though there are effective pixels of 99.99% or more, pixel missing or normally lit pixels account for 0.01%.
What to do if buttons don't work on Clarion NX700?
If nothing happens when you press the buttons and the display is not accurate on your Clarion Car Receiver, the microprocessor may have malfunctioned due to noise, etc. Turn off the power, then press the Reset button with a thin rod. Note that when the Reset button is pressed, turn off the ACC power. The frequencies of radio stations and setting data stored in memory are not cleared when the Reset button is pressed.
Why is the display dark on my Clarion NX700 Car Receiver?
If your Clarion Car Receiver display is dark, the Dimmer control may be too low. Adjust the Dimmer properly. The temperature inside the vehicle may be 0°C or lower. Set to an appropriate temperature (25°C or so) and check it again. Also, the headlight of the vehicle may be lit. The display is made dark at night to prevent glare; when the headlight of the vehicle is lit in the daytime, the display gets dark.
Why is there no image on my Clarion NX700 Car Receiver display?
If the image is not displayed on your Clarion Car Receiver, ensure that the parking brake is engaged.
What does it mean when my Clarion NX700 says 'No File'?
If you are not hearing any sound and the display shows “No File” on your Clarion Car Receiver, it indicates that there are no MP3/WMA/AAC files stored on the USB device. Make sure to store these files correctly on the USB device.
Detailed explanation of the functions of various buttons on the unit and remote control.
Overview of how to operate buttons and touchkeys on the unit and panel.
Steps to power the unit on and off, including system check behavior.
Instructions for inserting and removing discs, with handling notes.
Detailed guide on selecting and operating DVD video playback features and settings.
Guide to connecting and using a Bluetooth mobile phone for hands-free calls.
General| Display Size | 7-inch |
|---|---|
| Touchscreen | Yes |
| DVD Player | Yes |
| AM/FM Tuner | Yes |
| iPod/iPhone Compatibility | Yes |
| Rear View Camera Input | Yes |
| Steering Wheel Control Compatible | Yes |
| Resolution | 800 x 480 |
| Navigation | Yes |
| Bluetooth | Yes |
| Audio Formats Supported | MP3, WMA, AAC |
To Next Page
