Why is my Clarion NX700 not recognizing USB device?
If your Clarion Car Receiver does not recognize the USB device, the USB device may be damaged. Disconnect the USB device and reconnect. If the device is still not recognized, try replacing it with a different USB device.
What to do if USB device cannot be inserted into Clarion NX700 Car Receiver?
If the USB device cannot be inserted into your Clarion Car Receiver, it may have been inserted in the wrong direction. Try reversing the connection direction of the USB device. The USB connector may also be broken; in this case, replace it with a new USB device.
Why is the display dark on my Clarion NX700 Car Receiver?
If your Clarion Car Receiver display is dark, the Dimmer control may be too low. Adjust the Dimmer properly. The temperature inside the vehicle may be 0°C or lower. Set to an appropriate temperature (25°C or so) and check it again. Also, the headlight of the vehicle may be lit. The display is made dark at night to prevent glare; when the headlight of the vehicle is lit in the daytime, the display gets dark.
What to do if buttons don't work on Clarion NX700?
If nothing happens when you press the buttons and the display is not accurate on your Clarion Car Receiver, the microprocessor may have malfunctioned due to noise, etc. Turn off the power, then press the Reset button with a thin rod. Note that when the Reset button is pressed, turn off the ACC power. The frequencies of radio stations and setting data stored in memory are not cleared when the Reset button is pressed.
What to do if Clarion NX700 Car Receiver sound skips or is noisy?
If the sound skips or is noisy on your Clarion Car Receiver, the disc may be dirty. Clean the disc with a soft cloth. The disc may also be heavily scratched or warped, so replace it with a disc with no scratches.
Why does my Clarion NX700 sound skip or is noisy?
If your Clarion Car Receiver is skipping or producing noisy sound, the disc might be dirty. Clean it gently with a soft cloth. Alternatively, the disc could be heavily scratched or warped, in which case you should replace it. If you are using MP3/WMA/AAC files, ensure they are encoded properly.
How to fix disturbed iPod video image on Clarion NX700?
To fix a disturbed iPod video image on your Clarion Car Receiver, set the TV Signal setting (NTSC/PAL) of the iPod correctly.
What file system does my Clarion NX700 Car Receiver support?
If your Clarion Car Receiver cannot play the disc, ensure that the file system is correct. Use ISO9660 level 1/2, Romeo, Joliet, or Apple ISO file system for CD-R/RW, or UDF for DVD±R/RW.
How do I fix the 'Parental Violation' message on my Clarion Car Receiver?
If your Clarion Car Receiver is displaying “Parental Violation” and the disc cannot be played, the view is likely limited. Release the view limitation or change the parental level settings.
Why is there no image on my Clarion NX700 Car Receiver display?
If the image is not displayed on your Clarion Car Receiver, ensure that the parking brake is engaged.
Detailed explanation of the functions of various buttons on the unit and remote control.
Overview of how to operate buttons and touchkeys on the unit and panel.
Steps to power the unit on and off, including system check behavior.
Instructions for inserting and removing discs, with handling notes.
Detailed guide on selecting and operating DVD video playback features and settings.
Guide to connecting and using a Bluetooth mobile phone for hands-free calls.
General| Display Size | 7-inch |
|---|---|
| Touchscreen | Yes |
| DVD Player | Yes |
| AM/FM Tuner | Yes |
| iPod/iPhone Compatibility | Yes |
| Rear View Camera Input | Yes |
| Steering Wheel Control Compatible | Yes |
| Resolution | 800 x 480 |
| Navigation | Yes |
| Bluetooth | Yes |
| Audio Formats Supported | MP3, WMA, AAC |
To Next Page
