Clarion NX700 - Entering an Address with a ZIP Code

38
x To enter a new city:
1. Tap the button with the name of the city, or if you have changed the country/state,
tap
.
2. Start entering the city name on the keyboard.
3. Get to the list of search results:
x After entering a couple of characters, the names that match the string appear
in a list.
x Tap
to open the list of results before it appears
automatically.
4. Select the city from the list.
4. Tap the
button.
5. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then automatically
calculated, and you can start navigating.
3.1.2.6 Entering an address with a ZIP code
All of the above address searching possibilities can be performed with entering the ZIP code instead of
the city name. Find below an example with a full address:
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Simple mode), or , (Advanced mode).
2. By default, Clarion Mobile Map proposes the country/state and city where you are. If needed, tap
the button with the name of the country/state, and select a different one from the list.
3. Tap the button with the name of the city, and enter the ZIP code:
1. Start entering the ZIP code on the keyboard.
2. Get to the list of results:
x After entering a couple of numbers, matching results appear in a list.
x Tap
to open the list of results before it appears automatically.
3. Pick the city from the list.
4. Enter the street name:
1. Tap
.
2. Start entering the street name on the keyboard.