EasyManuals Logo

Clarion NX700 User Manual

Clarion NX700
177 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
38
NX700
English
Owner’s manual
Recalling a preset station
A total of 18 Sirius stations and 18 XM stations
can be stored (Sirius: 6-SR1, 6-SR2, and 6-SR3;
XM: 6-XM1, 6-XM2, and 6-XM3). This allows you
to store your favorite stations in memory for later
recall.
1. Display the Preset Key screen by touching the
[Preset Info] key.
2. Select the desired band by touching the
[Band] key.
3. Touch the corresponding Preset key to recall
the stored station.
The system will tune to the specified station.
Touching and holding the desired Preset
key for more than 2 seconds stores the
current station into the preset memory.
Manual memory
1. Display the Preset Key screen by touching the
[Preset Info] key.
2. Select the desired band by touching the
[Band] key.
3. Tune to the station you wish to store.
4. Touch and hold the desired Preset key you
wish to store to for more than 2 seconds.
A beep sounds and the current station is
stored into the preset memory.
Receiving stations selected by
category
Satellite Radio allows you to select broadcast
channel category (contents).
1. Touch the [Category] key to display the
Category List screen.
2. Touch the desired Category item key to select
the category.
The system will tune in to the lowest available
channel of the specified category.
Touch the [{] or [}] key to scroll the
category list.
3. Touch the [{ (C-Seek)] or [} (C-Seek)] key
to select a station.
The system will tune to the previous or next
available channel that meets the specified
category.
4. To return to the previous screen, touch the
[Back] key.
Note:
Touching the [Back] key within 1 second after
selecting the category cancels the category
selection and returns to the channel previously
received.
If you do not touch the screen for 7 seconds, the
display will return to the previous screen.
Category Scan function
In a category scan, broadcast channels in the
same category as the current channel are
selected about every 10 seconds. During
scanning channels are performed, the display
mode cannot be switched.
1. Touch the [Category] key to display the
Category List screen.
2. Touch the desired Category item key to select
the category.
Touch the [{] or [}] key to scroll the
category list.
3. Touch the [CAT Scan] key.
The system will start the category scan from
the lowest available channel.
4. Touch the [CAT Scan] key again to tune to
the channel currently received.
The category scan will be terminated.
Note:
When you touch the [Back] key during the
category scan to return to the previous screen, the
category scan will continue.
The category scan can be also performed by
touching the [CAT Scan] key on the Sirius/XM
mode screen.

Table of Contents

Other manuals for Clarion NX700

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarion NX700 and is the answer not in the manual?

Clarion NX700 Specifications

General IconGeneral
BrandClarion
ModelNX700
CategoryCar Receiver
LanguageEnglish

Related product manuals